Connectivity Test
Ready for SpectrShare? Check if your browser and network are ready for peer-to-peer file sharing and video streaming.
The test runs in your browser. It checks which WebRTC features your browser supports, contacts public STUN servers to measure latency and discover your public address, gathers ICE candidates, and works out your NAT type from them. From those results it tells you whether you can host shares, view them, or are likely to need a TURN relay. For a walkthrough of each step, read how to test your WebRTC connection.
NAT (Network Address Translation) is how your router shares a single public IP address among all your devices. The type of NAT your router uses determines how easily you can establish direct peer-to-peer connections.
Full Cone / Open NAT: easiest to connect. Any external device can reach you.
Restricted / Port-Restricted NAT: moderate difficulty. Connections work with most peers but may need a STUN server to negotiate.
Symmetric NAT: most restrictive. Direct P2P connections often fail, and a relay server (TURN) may be needed.
Direct (P2P): data flows straight from one browser to another. Fastest, most private, no middleman. This is the ideal case.
Relay (TURN): data routes through an intermediary server. Slower, less private, but works when direct connections fail due to strict firewalls or NAT types.
SpectrShare always tries direct first. If that fails, it can fall back to relay if you enable the option.
- Use a wired Ethernet connection instead of Wi-Fi when possible
- If on Wi-Fi, stay close to the router and avoid congested channels
- Avoid VPNs during file sharing. They add latency and can block P2P
- If behind a corporate firewall, try enabling TURN relay in share settings
- Close bandwidth-heavy apps (streaming, large downloads) during transfers
- Some ISPs use Carrier-Grade NAT. If direct connections consistently fail, ask your ISP about getting a public IP